Torque Converter Inspection - Honda TRX680FA Service Manual

DRIVETRAIN SYSTEM
washers
inner collar
needle bearings
THRUSTNEEDLE
BEARING
TORQUE CONVERTER INSPECTION
NOTE:
• Replace the torque converter as an assembly
(from converter to inner collar).
Check the primary drive gear teeth for abnormal
wear or damage.
Hold the torque converter and turn the drive gear to
check the one-way clutch in the torque converter.
The gear should turn counterclockwise smoothly
and should not turn clockwise.
DRIVE GEAR
Check the needle bearings for abnormal wear or
damage.
Check the one-way clutch sprag in the stator shaft
for abnormal wear, damage or irregular movement.
Check the sprag contacting surface for abnormal
wear or damage.
STATOR SHAFT INNER COLLAR
14-61