Honda TRX680FA Service Manual page 95

MAINTENANCE
DIFFERENTIAL OIL
LEVEL CHECK
Place the vehicle on a level surface.
Remove the oil filler cap.
Check that the oil level is up to the lower edge of the
oil filler hole.
Check for leaks if the oil level is low.
Pour the oil through the filler hole until it reaches
the lower edge of the hole.
RECOMMENDED OIL: Hypoid gear oil SAE #80
Coat a new O-ring with grease and install it into the
oil filler cap groove.
Install the oil filler cap and tighten it.
TORQUE: 12 N m (1.2 kgf m, 9 Ibf-fft)
OIL CHANGE
Place the vehicle on a level surface.
Remove the oil filler cap and drain bolt to drain the
oil.
When the oil is completely drained, install the drain
bolt with a new sealing washer.
TORQUE: 12 N m (1.2 kgf m, 9 Ibf ft)
Fill the differential case with the recommended oil
(page 4-16).
OIL CAPACITY:
175 cm
3
(5.9 US oz, 6.2 Imp oz) at draining
220 cm
3
(7.4 US oz, 7.7 Imp oz) at disassembly
4-16