Engine Air Guide- •3-12; Engine Guard - Honda 2005 FOURTRAX FOREMAN TRX500 TM Service Manual

FRAME/BODY PANELS/EXHAUST SYSTEM
ENGINE AIR GUIDE
RIGHT ENGINE AIR GUIDE
Remove the right side cover (page 3-4).
Remove the four trim clips.
Release the boss from the grommet in the heat
guard plate and remove the right engine air guide
while releasing the two tabs from the right inner
fender.
Install the right engine air guide in the reverse order
of removal.
BOSS
GROMMET
RIGHT ENGINE
AIR GUIDE
TABS TRIM CLIPS
LEFT ENGINE AIR GUIDE
Remove the left side cover (page 3-5).
Remove the screw.
Release the grommet from the tab of the fuel tank
sub-side cover and remove the left engine air guide
while unhooking the two tabs from slits in the left
inner fender.
Install the left engine air guide in the reverse order
of removal.
SCREW
SLITS
TAB
GROMMET
LEFT ENGINE AIR GUIDE TABS
ENGINE GUARD
Remove the following:
- two 6 mm bolts
- two 8 mm bolts
- engine guard
Install the engine guard in the reverse order of
removal.
ENGINE GUARD
8 mm BOLTS 6 mm BOLTS
3-12