Air Cleaner Housing Drain Hose; Spark Plug - Honda TRX680FA Service Manual

MAINTENANCE
Install the element band onto the air cleaner ele-
ment and the element assembly over the connect-
ing tube flange of the housing securely.
Tighten the band screw.
NOTE:
• Failure to properly tighten the band screw will
allow the air cleaner element to fall off and
engine damage could result.
Install the air cleaner element holder while aligning
the element core boss with the retainer hole.
Install the air cleaner element housing cover while
aligning the cover boss with the element holder as
shown.
Secure the air cleaner housing cover with the retain-
ing clips and lid springs.
Install the seat (page 3-4).
AIR CLEANER HOUSING DRAIN HOSE
Remove the drain hose from the bottom of the air
cleaner housing to empty any deposits.
Install the drain hose securely.
NOTE:
• If the vehicle is used in very wet or muddy condi-
tions, more frequent inspections are required.
SPARK PLUG
Remove the seat (page 3-4).
Disconnect the spark plug cap and clean around the
spark plug base with compressed air.
Remove the spark plug.
4-7