Honda TRX680FA Service Manual page 255

SUB-TRANSMISSION/GEARSHIFT LINKAGE
SERVICE INFORMATION
GENERAL
• This section covers service of the sub-transmission and gearshift linkage (forward-reverse). These parts can be serviced
with the engine installed in the frame.
• Sub-transmission lubricating oil is fed through the oil passage in the rear crankcase cover. Clean the oil passage before
installing the crankcase cover.
• Be careful not to damage the crankcase and cover mating surfaces when servicing.
• For automatic transmission service (page 14-3).
SPECIFICATIONS
Unit: mm (in)
ITEM
Shift fork
Reverse idle
gear
I.D.
Claw thickness
Shaft O.D.
Collar I.D.
Shaft O.D.
Collar-to-shaft clearance
STANDARD
11.000-11.021 (0.4331-0.4339)
4.93-5.00(0.194-0.197)
10.966 - 10.984 (0.4317 - 0.4324)
13.000 - 13.034 (0.5118 - 0.5131)
12.966 - 12.984 (0.5105 - 0.5112)
-
SERVICE LIMIT
11.04 (0.435)
4.5(0.18)
10.96(0.431)
13.05(0.514)
12.93 (0.509)
0.10 (0.004)
TORQUE VALUES
Gear selector lever pivot nut
Gear selector arm pinch bolt
Gear selector cable lock nut
Engine oil drain bolt
9 N-m (0.9 kgfm, 6.5 Ibfft)
16 N-m (1.6 kgf-m, 12 Ibfft)
26 N-m (2.7 kgf-m, 20 Ibfft)
25 N-m (2.5 kgf-m, 18 Ibfft)
TOOLS
Remover weight
07741-0010201
or 07936-371020A or 07936-3710200
(U.S.A. Only)
Attachment, 37 x 40 mm
07746-0010200
Pilot, 17 mm
07746-0040400
Pilot, 25 mm
07746-0040600
Driver
07749-0010000
Attachment, 28 x 30 mm
07946-1870100
12-3