COOLING SYSTEM
RADIATOR/COOLING FAN
RADIATOR REMOVAL
Remove the following:
-
oil cooler (page 5-12)
-
radiator reserve tank (page 7-9)
-
left inner fender (page 3-9)
Drain the coolant from the system (page 7-7).
Remove the two trim clips (page 3-4) and each grill
cover.
GRILL COVEiR
The engine must be
cool before remov-
ing the radiator cap,
or severe scalding
may result.
Disconnect the breather hose (pink) from the frame
pipe.
Release the clip to free the fan motor wire and dis-
connect the motor 2P (White) connector.
Remove the radiator cap and the rubber heat guard
from the filler neck.
Reinstall the radiator cap.
Disconnect the upper and lower water hoses.
Be careful not to Remove the two mounting bolts.
damage the radiator Release the mounting bosses on the radiator bot-
fins with the oil tom from the frame and remove the radiator assem-
pipe.
bly while pulling the oil pipes aside.
2P (WHITE) CONNECTOR
PIPES
COOLING FAN DISASSEMBLY
Release the fan motor wire and breather hose from
the clamp of the motor stay, and disconnect the
breather hose.
Remove the three washer-bolts and stay/motor
assembly from the radiator.
HOSE
STAY/MOTOR
CLAMP
BOLTS
7-10