Steering Shaft •15-28 - Honda TRX680FA Service Manual

FRONT WHEEL/SUSPENSION/STEERING
Install the front wheel (page 15-11).
Place the vehicle on level ground and tighten the
lower arm pivot nuts.
TORQUE: 44 N m (4.5 kgf m, 32 Ibf-ft)
Install the front carrier pipe (page 3-10).
STEERING SHAFT
REMOVAL
Remove the following:
- front wheels (page 15-11)
- inner fenders (page 3-9)
- front fender (page 3-12)
- lower meter covers (page 3-18)
- brake hose (from the clamp)
- wires (from the clip)
two nuts
combination meter/stay assembly
brake hose (from the hose clamp)
| CLAMP
IFGA model shown
IBRAKE HOSE
CLIP
METER/STAY
Keep the master - handlebar lower holder nuts and washers
cylinder reservoir - handlebar assembly (from the steering shaft)
upright.
I CLAMP ^ ^ ^ ^ H NUTS I
HANDLEBAR ASSEMBLY
15-28