Front Master Cylinder - Honda TRX680FA Service Manual

BRAKE SYSTEM
REAR BRAKE DISC INSPECTION
Visually inspect the disc for damage or cracks.
Measure the brake disc thickness at several points.
SERVICE LIMIT: 6 mm (0.2 in)
Replace the brake disc if the smallest measurement
is less than the service limit.
Check the brake disc for warpage.
SERVICE LIMIT: 0.5 mm (0.02 in)
Replace the brake disc if the warpage exceeds the
service limit.
FRONT MASTER CYLINDER
DISASSEMBLY
Drain the brake fluid from the front brake hydraulic
system (page 17-7).
Disconnect the brake hose by removing the oil bolt
and sealing washers.
SEALING WASHERS
Disconnect the front brake switch connectors.
Remove the master cylinder holder bolts, holder
and master cylinder.
OIL BOLT
MASTER CYLINDER
HOLDER
BOLTS
17-13