Differential Removal - Honda TRX680FA Service Manual

FRONT DRIVING MECHANISM
DIFFERENTIAL REMOVAL
Drain the differential oil (page 4-16).
Remove the following:
- left front mud guard (page 3-8)
- both inner fenders (page 3-9)
- front grille (page 3-10)
- left drive shaft (page 18-7)
- two bolts, guard plate and front Vehicle Speed
Sensor (VS sensor).
- two bolts and VS sensor cover
Remove the rear VS sensor wire and front final
clutch wire from the clamp.
Remove the three bolts, VS sensor cover stay and
rear VS sensor.
Disconnect the front final clutch 2P (Green) connec-
tor.
Remove the following:
- 8 mm mounting nut and bolt
- two 8 mm bolts and mounting bracket
- 10 mm mounting nut, bolt and spacer
2P (GREEN)CONNECTOR
REAR VS SliNSOR
10 mm NUT AND BOLT
8 mm NUT AND BOLT | MOUNTING BRACKET |
18-12