Honda TRX680FA Service Manual page 195

ENGINE REMOVAL/INSTALLATION
Remove the following:
- oil pipes (by removing each joint bolt)
- water hose (from the water pump)
Remove the differential mounting fasteners, spacer
and bracket.
Move the front differential forward to get the clear-
ance for front propeller shaft removal.
Pull the propeller shaft joint out of the output shaft.
Remove the boot band from the dust boot and
release the boot off the pinion joint of the differen-
tial.
Pull the propeller shaft to force the stopper ring at
the shaft end past the groove in the pinion joint and
remove the propeller shaft.
PROPELLER
SHAFT JOINT
Remove the upper engine hanger bolt and nut.
Remove the upper engine hanger bracket bolts,
bracket and mounting rubbers.
MOUNTING RUBBERS
MOUNTING
BOLT/NUT
8-6