FUEL SYSTEM (PGM-FI)
THROTTLE BODY
REMOVAL
NOTICE
Before disconnecting fuel feed hose, relieve pres-
sure from the system (page 6-32).
Remove the following:
-
relieve the fuel pressure and disconnect the
quick connect fitting (page 6-32).
-
seat (page 3-4)
-
air cleaner housing (page 6-41)
Remove the trim clip and throttle body cover.
Unhook and remove the MAP/TP sensor connector
cover, then disconnect the MAP/TP sensor 5P
(Black) connector.
Disconnect the IACV 4P (Black) connector, injector
2P (Gray) connector and release the wire harness
from the wire clamp.
5P (BLACK) CONNECTOR
4PJBLACK) CONNECTOR
2P (GRAY) CONNECTOR
6-43