LIGHTS/METERS/SWITCHES
FRONT BRAKE SWITCH
NOTE:
• The upper switch is the front brake (inhibitor)
switch.
Check the front brake lever free play and adjust it if
necessary (page 4-19).
Disconnect the front brake switch connectors and
check for continuity between the switch terminals.
There should be continuity with the front brake
lever squeezed and no continuity with the lever
released.
HORN SWITCH (AUSTRALIA type only)
Disconnect the horn switch wire connectors.
Check the continuity between the connector termi-
nals.
There should be continuity when the horn switch is
pushed, and be no continuity when the switch is
released.
HORN (AUSTRALIA type only)
Disconnect the wire connectors from the horn.
Connect a 12 V battery to the horn terminals.
The horn is normal if it sounds when the 12V battery
is connected across the horn terminals.
BRAKE SWITCH CONNECTORS
CONNECTORS
HORN
23-20