ENGINE REMOVAL/INSTALLATION
ENGINE REMOVAL
Drain the engine oil (page 4-11).
Drain the coolant (page 7-7).
Remove the following:
-
front center grille (page 3-10)
-
center mud guards (page 3-7)
-
front mud guards (page 3-8)
-
inner fenders (page 3-9)
-
rear fender assembly (page 3-15)
-
engine side covers (page 3-17)
-
exhaust system (page 3-19)
-
throttle body (page 6-43)
-
heat guard plate (page 6-39)
Remove the bolt and the left mud guard stays from
the footpeg bracket.
Disconnect the ECT sensor 2P (Black) connector.
Remove the spark plug cap from the spark plug.
Disconnect the water hose from the thermostat
housing.
Disconnect the alternator 5P (Natural) connector.
Disconnect the gear position switch 3P (Natural)
connector.
2P(BLACK)CONNEClOH
3P NATURAL CONNECTOR
5P NATURAL) CONNECTOR
8-4