Honda TRX680FA Service Manual page 429

BRAKE SYSTEM
Remove the brake pedal pivot bolt and dust seals.
Unhook the brake switch spring from the return
spring.
Unhook the return spring from the pedal and frame.
Separate the master cylinder from the brake pedal
by removing the cotter pin and joint pin.
Remove the boot from the master cylinder.
PIVOT BOLT
MASTER CYLINDER
COTTER PIN
BOOT
Remove the snap ring using the special tool.
SNAP RING
TOOL:
Snap ring pliers
Remove the push rod.
07914-SA50001 or
07914-3230001
17-22