Differential Installation - Honda TRX680FA Service Manual

FRONT DRIVING MECHANISM
Install the boot over the propeller shaft joint while
compressing the spring.
Install the boot band into the boot groove.
PROPELLER SHAFT
BOOT BAND
BOOT PROPELLER SHAFT JOINT
DIFFERENTIAL INSTALLATION
Place the differential into the frame.
Install the right drive shaft onto the differential in
the same manner as on (page 18-11).
Install a new stopper ring into the groove in the pro-
peller shaft.
Apply 5 - 8 g of molybdenum disulfide grease to the
propeller shaft joint splines.
Install the propeller shaft assembly into the differen-
tial until the stopper ring seats in the pinion joint
groove.
Make sure that the stopper ring is seated properly
by pulling on the pinion joint lightly.
Install the propeller shaft boot over the pinion joint
securely and the boot band into the boot groove.
PROPELLER SHAFT BOOT
18-30