Honda TRX680FA Service Manual page 267

SUB-TRANSMISSION/GEARSHIFT LINKAGE
Install the arm B by aligning the slit with the mark
(punch mark).
Install the pinch bolt and tighten it.
TORQUE: 16 N m (1.6 kgf m, 12 Ibf-ft)
Tighten the pivot nut.
TORQUE: 9 N m (0.9 kgf m, 6.5 Ibf-ft)
Install the return spring in the direction as shown.
Apply grease to the gate groove.
Check the selector lever for smooth operation.
Adjust the selector cable if necessary (page 12-15).
Install the fuel tank (page 6-39).
SELECTOR CABLE ADJUSTMENT
Remove the following:
- fuel tank and head guard plate (page 6-39).
- left engine side cover (page 3-17)
Loosen the cable lock nuts fully.
12-15