REAR WHEEL/SUSPENSION
Install new nuts and tighten them.
TORQUE:
Upper arm: 54 N-m (5.5 kgfm, 40 Ibf-ft)
Lower arm: 34 N-m (3.5 kgf-m, 25 Ibfft)
WHEEL HUB
Install a new dust seal into the hub with the metal
side facing out until it is flush with the hub surface.
Apply molybdenum disulfide grease to the drive
shaft splines.
Pack the lip cavities of the outer dust seal with 2.5 -
3 g of grease.
HUB
M
- — ^ - 4
»
j
s
S*
' DUST SEAL
Apply molybdenum disulfide grease to the dust seal
and install the wheel hub.
HUB
16-9