Honda TRX680FA Service Manual page 196

ENGINE REMOVAL/INSTALLATION
Set suitable
wooden blocks
between the
engine and lower
frame pipe to sup-
port the engine for
ease of bolt
removal.
Remove the left lower engine hanger nut, bolt and
mounting rubbers.
Remove the two bolts and hanger bracket.
Remove the right lower engine hanger nut, bolt,
spacer and mounting rubbers.
Hold the engine
securely and take
care not to damage
the frame and
engine.
Move the engine forward and disconnect the output
shaft from the rear propeller shaft.
Remove the universal joint.
Remove the engine out of the frame toward the left
side.
NOTICE
Do not hold or strike the solenoid valves on the shift
valve body during engine removal. Holding the
solenoid valve or excessive shock may damage the
solenoid valve.
Remove the engine hanger bushings and dust seals.
MOUNTING RUBBERS
SPACER
•
BOLT
DUST SEAL
8-7