Headlight; Taillight - Honda TRX680FA Service Manual

LIGHTS/METERS/SWITCHES
HEADLIGHT
BULB REPLACEMENT
Align the socket
tabs with the head-
light grooves prop-
erly.
Remove the screw and the headlight cover by
releasing the tab from the slit in the headlight case.
Remove the dust cover.
Remove the bulb socket by turning it counterclock-
wise.
Remove the bulb from the headlight.
Install a new bulb in the reverse order of removal.
REMOVAL/INSTALLATION
Remove the headlight bulb socket (page 23-4).
Remove the two screws attaching the headlight
wire clamps.
Remove the two mounting bolts and the headlight.
Install the headlight in the reverse order of removal.
NOTE:
• The headlight beam can be adjusted vertically by
removing the access plug and turning the head-
light beam adjusting screw.
TAILLIGHT
Align the cover cap
tabs with the
grooves in the
cover properly.
BULB REPLACEMENT
Remove the screw and taillight cover cap.
Turn the bulb socket counterclockwise and remove
it.
Turn the taillight bulb counterclockwise while push-
ing it in and remove it.
Install a new taillight bulb in the reverse order of
removal.
HEADLIGHT COVER
SCREW
ADJUSTING SCREW
ACCESS PLUG
DUST COVER
SOCKET BULB
HEADLIGHT
SCREWS
BOLTS
SCREW
SOCKET
BULB
23-4