Preparing Required Items - Alaxala AX6300S Quick Start Manual

1. Preparation

1.3 Preparing required items

To set up a Switch, prepare the following in addition to the Switch, components, and
accessories.
Operation terminals
Prepare a personal computer or a workstation that supports the specifications in the
following table.
Table 1-1 Operation terminal specifications
Communication port
Communication software
Communication
settings
#1: The communication speed of the CONSOLE port on the Switch is set to 9600
bps when shipped from the factory.
RS-232C crossover cable
To connect an operation terminal to the CONSOLE port of the Switch, use a
RS-232C crossover cable with a D-sub 9-pin (female) connector on both ends and
use #4-40 inch-screws. The following figure shows the pin arrangement of an
RS-232C crossover cable.
Figure 1-2 Pin arrangement of an RS-232C crossover cable
Interface cables
An interface cable is necessary to connect to other devices. For details about
interface cables, see the AX6300S Hardware Instruction Manual.
4
Item
RS-232C port
Tera Term Pro (Version 2.3) or communication
software that meets the communication settings
below.
Communication 8 bits, 1 stop bit, no parity
parameters
Communication 19200 bps, 9600 bps, 4800 bps, 2400 bps, 1200 bps
#1
speed
Specification