Chapter 2 User Interface; Enable; Service Password-Encryption - TP-Link T2600G-28TS Reference Manual

Chapter 2

enable

2.1
Description
The enable command is used to access Privileged EXEC Mode from User
EXEC Mode.
Syntax
enable
Command Mode
User EXEC Mode
Privilege Requirement
None.
Example
If you have set the password to access Privileged EXEC Mode from User EXEC
Mode:
T2600G-28TS>enable
Enter password：
T2600G-28TS#

service password-encryption

2.2
Description
The service password-encryption command is used to encrypt the password
when the password is defined or when the configuration is written, using the
symmetric encryption algorithm. Encryption prevents the password from being
readable in the configuration file. To disable the global encryption function,
please use no service password-encryption command.
Syntax
service password-encryption
no service password-encryption
Command Mode
Global Configuration Mode
User Interface
21