Common Command Description - TP-Link P1201-08 User Manual

NOTE：
Gateway ONT(HGU) configure ONT port vlan in web.
Configure service port. Inner vlan is 100. Outer vlan is 400.
OLT(config)# service-port 10 vlan 400 gpon 0/0 port 1 ont 1 gemport 2 multi-service user-vlan
100 tag-action default

7. Common Command Description

interface gpon 0/0
interface ge 0/0
show vlan all
show port vlan <Port ID>
show port state <Port ID>
show version
show device
show interface mgmt
show interface vlanif brief
show current-config
show saved-config
show ont info 0/0 <Port ID> all
show ont info 0/0 <Port ID> <ONT ID>
show ont autofind <Port ID>
show ont optical-info <Port ID> <ONT ID>
show ont port state <Port ID> <ONT ID> eth <ONT Port ID>
Command
Enter OLT PON board（Apply to
box OLT
is 0/0）
Enter OLT uplink(ge) board（In
default, box OLT all is 0/0）
View all vlan in OLT
View OLT uplink(ge) and PON port
vlan(The premise is we need enter the
board card mode.）
View OLT uplink port and PON port
status（The premise is we need enter
the board card mode.）
View OLT software version
View OLT mode and other
information
View OLT outband Manage IP
View OLT inband Management
IP(The premise is we need have
vlanif interface)
View OLT running configuration
View OLT have saved configuration
View ONT register status in PON
port
View ONT details information
View autofind but unregistered ONT
in PON port(The premise is we need
to enter the PON board mode)
View ONT optical information
View ONT port status(The premise is
we need to enter the PON board
mode)
30
Description
P1201-08 OLT
, all default