Show Cluster Ndp; Show Cluster Ntdp - TP-Link JetStream TL-SL5428E Cli Reference Manual
24-port 10/100mbps + 4-port gigabit jetstream l2 managed switch
Hide thumbs
Also See for JetStream TL-SL5428E:
- Reference manual (341 pages) ,
- User manual (307 pages) ,
- Cli reference manual (224 pages)
Table of Contents
Advertisement
Example
Specify the current switch as individual switch:
TL-SL5428E(config)#cluster individual
show cluster ndp
Description
The show cluster ndp command is used to display the NDP information.
Syntax
show cluster ndp [ interface [ fastEthernet port | gigabitEthernet port |
ten-gigabitEthernet port ] ]
Parameter
port —— Specify the Ethernet port number. The NDP information of all ports
will be displayed if the port number is not specified here.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the global NDP information of the switch:
TL-SL5428E(config)#show cluster ndp
Display the NDP information of all the ports of the switch:
TL-SL5428E(config)#show cluster ndp interface
show cluster ntdp
Description
The show cluster ntdp command is used to display NTDP configuration
information.
Syntax
show cluster ntdp [ interface [fastEthernet port | gigabitEthernet port ] |
device-list ]
Parameter
port —— The Fast/Gigabit Ethernet port number. By default, the configuration
of all Fast / Gigabit Ethernet ports is displayed.
device-list —— To display the device table of NTDP.
TL-SL5428E
JetStream L2 Managed Switch CLI Guide
302
Advertisement
Table of Contents
Need help?
Do you have a question about the JetStream TL-SL5428E and is the answer not in the manual?