Show Cluster Ntdp; Show Cluster - TP-Link JetStream TL-SL3452 Reference Manual

show cluster ntdp

Description
The show cluster ntdp command is used to display NTDP configuration
information.
Syntax
show cluster ntdp [ interface [fastEthernet port | gigabitEthernet port ] |
device-list ]
Parameter
port —— The Fast/Gigabit Ethernet port number. By default, the configuration
of all Fast / Gigabit Ethernet ports is displayed.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the global information of NTDP:
TL-SL3428#show cluster ntdp
Display the NTDP configuration of all Ethernet ports:
TL-SL3428#show cluster ntdp interface
Display the device table of NTDP:
TL-SL3428#show cluster ntdp device-list

show cluster

Description
When the current switch is Commander Switch, the show cluster command is
used to display the global configuration of Cluster.
Syntax
show cluster
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the global configuration of Cluster:
TL-SL3428#show cluster
TL-SL3428/TL-SL3452
219
JetStream L2 Managed Switch CLI Guide