8
Field Replaceable Unit Disassembly/Assembly
Vacuum dust
out of this area
before removing
Figure 8-3 Removing the top panel
8-6
Phaser 380 Color Printer
1.
Top cover: Vacuum dust out of the top cover before you remove it
a. Open the top cover and tilt it back as far as it will travel to unclip
its arms from the top panel.
b. Slide the ink loader's spring crossarm to the center of the ink
loader. (You may need to remove some ink sticks.)
c. Remove the two screws on each side of the ink loader slots
securing the top panel in place.
d. Slide the top panel back and up to lift and remove the top panel.
Position spring
crossarm to
rear of loader
Top cover
Unclip arms
Top panel
9661-03