Figure 7-15 Cleaning The Upper Tray Separator Pad - Tektronix Phaser 380 Service Manual

8. Examine the separator pad located inside the media tray near the
paper tray's handle. If it is coated with dust, wipe the separator pad
using a clean cloth or a dry brush.
Caution
Do not use alcohol or other solvents on this pad.
Wipe the pick pad
with a clean cloth

Figure 7-15 Cleaning the upper tray separator pad

9.
Reload media in the media tray. Replace the upper media tray in the
printer.
10. The front panel re-displays the following message:
Clean:Media Tray Jams
<---- Clean
11. Press the Exit button to return to normal operation. Store the cleaning
tray in its original packaging for later use.
If media feed problems persist, you may need to manually clean the
media-pick roller by hand with an alcohol-soaked cloth.
Cleaning and Maintenance
Pick
pad
Test
9661-152
Service Manual 7-17
7