Figure 7-19 Locking The Transit Lock - Tektronix Phaser 380 Service Manual

7
Cleaning and Maintenance
7-24 Phaser 380 Color Printer
Caution To avoid damaging the printer's internal components, always turn the
printer power off and lock the transit restraint before moving the
printer. Failure to do so may result in damage to the printers' internal
components and may invalidate your printer's warranty.
2. Locate the transit restraint on the right side of the printer and insert a
wide flat-blade screwdriver or coin into the transit restraint slot.

Figure 7-19 Locking the transit lock

3. While pressing inward with medium pressure, turn the transit
restraint slot in a clockwise direction to lock the printhead in position.
The lock button is recessed from the side of the printer when fully
engaged.
3
...to turn the
transit lock to
the locked
position
Use a coin
or screwdriver...
9661-157