Tektronix Phaser 380 Service Manual page 64

2
Installing the Printer and Drivers
2-26 Phaser 380 Color Printer
6. The Finish Installation dialog box contains instructions for
completing the printer software setup; click Next. The Add Printer
Wizard program is automatically launched.
Note
The setup instructions remain visible while the Add Printer Wizard is
running. If you click on the instructions dialog box, press the Alt-Esc
keys to see the Add Printer Wizard again.
7. In the Add Printer Wizard, click Next in the opening dialog box.
8.
Select the printer's connection, either Local Printer or
Network Printer, and click Next.
9. In the Manufacturers/Printers dialog box, click Have Disk.
10. Type in the drive for the CD-ROM or diskette, and click OK.
11. Select the printer, and click Next:
12. Tektronix Phaser 380 (standard printer configuration)
13. Tektronix Phaser 380 Extended (Extended Features option)
If you are not sure of the printers's version, check the printer's startup
page for Extended Features: Yes or No.
14. Select the port the printer is connected to, and click Next.
15. Enter a name for the printer, and select the Phaser 380 as the default
printer if desired, and click Next.
16. Decide if you want to print a test page, Yes or No, and click Finish.
17. In the Installation Completed dialog box, click Finish.
18. You may see a Restart Windows dialog box if the system needs to
update some files. Decide if you want to restart now or later, and
click OK.
Note See the "Adobe PostScript Printer Driver User Guide" on the
printer's CD-ROM (USERGUIDE.PDF) for detailed information on
the AdobePS 4 driver.