Following the short flush, the printhead is tilted back and the cap/wipe/purge
assembly is lowered into its standby position. A cap/wipe/purge sensor on I/O
board 2 detects when the cap/wipe/purge assembly is stored in its standby
position. Then the printhead is tilted forward into its print position and a
"flush" page is printed. The flush page allows each jet to eject ink that may be
slightly contaminated with another ink.
Cap/wipe/purge
assembly
Printhead faceplate
Purge
Wipe
Flush
Dab
Figure 5-19 The printhead maintenance cycle
Air
Vacuum
valve
accumulator
Wiper
blade
Service Manual
5
Theory of Operation
Vacuum
pump
9661-134
5-35