Printing Too Light Or Too Dark; Image Is Offset Or Cut Off; Wrinkling; Oil Streaks On Top Of Print - Tektronix Phaser 360 Service Manual
Color printer
Hide thumbs
Also See for Phaser 360:
- User manual (252 pages) ,
- Supplementary manual (5 pages) ,
- Network manual (186 pages)
Table of Contents
Advertisement
6
Troubleshooting
6-16
Phaser 360 Color Printer
2.
Replace the power control board.
3.
Replace the printhead.
Printing too light or too dark
1.
Perform the procedure, "Adjustments" on page 9-6.
Image is offset or cut off
1.
Check the application for the correct image sizing and orientation.
2.
Ensure that Letter or A4 is the selected paper-size.
Wrinkling
1.
Try different media from a sealed package.
2.
Replace the drum/transfix assembly.
Oil streaks on top of print
1.
Clean the stripper fingers.
2.
Run chase pages through the printer to clean the drum. PC
diagnostics can help initiate chase pages.
3.
Clean or replace the maintenance tray.
Advertisement
Table of Contents
