Tektronix Phaser 380 Service Manual page 10

7 Cleaning and Maintenance
Replacing the media tray separator pad 7-2
Cleaning the printer 7-4
Cleaning supplies 7-4
Using isopropyl alcohol 7-4
Cleaning for light stripes: printhead 7-5
Cleaning for ink smears and transfix problems: internal paper path 7-7
Cleaning for jams and ink smears: media feed rollers 7-8
Cleaning for ink smears: paper exit path 7-12
Cleaning for upper tray jams: media pick roller 7-14
Cleaning the upper pick roller manually 7-18
Cleaning for lower tray jams: paper pick roller 7-18
Cleaning the lower pick roller manually 7-21
Cleaning the lower tray paper-feed rollers 7-21
Moving the printer 7-23
Wait 45 minutes after-power off before moving 7-23
Removing the maintenance tray 7-23
Locking the transit restraint
Vacuum 7-25
Lubrication 7-25
Drum temperature sensor 7-25
Inspection 7-26
8 Field Replaceable Unit Disassembly/Assembly
Required tools 8-1
Lower Paper Tray Assembly 8-3
Cabinet panels and covers 8-4
Ink loader 8-9
Ink loader support/cross member 8-11
Fans 8-12
Rear fan 8-12
Vacuum system 8-13
Vacuum pump 8-13
Accumulator 8-14
Solenoid valve 8-15
Y-axis belt drive assembly 8-16
Media width sensor assembly 8-18
Heaters 8-19
Drum heater/fan assembly 8-19
Paper preheater 8-21
Drum position sensor assembly 8-23
x Phaser 380 Color Printer
7-23