2.
Front cover:
a. Remove the screw securing each of the two front cover pivots.
b. Unhook the lift springs from the front cover.
c. Pull the front cover off of the two pivots.
3.
Front panel:
a. Remove the left- and right-side panels.
b. Lift out the front panel and disconnect the front panel display
wiring harness from the underside of the front panel. Remove the
front panel.
Front
panel
Remove
2 screws
Figure 8-4 Removing the printer front cover and front panel
Field Replaceable Unit Disassembly/Assembly
Pivots
Unhook
springs on
both sides
Front
cover
9661-04
Service Manual
8-7
8