Figure 8-5 Removing The Exit Cover - Tektronix Phaser 380 Service Manual

8
Field Replaceable Unit Disassembly/Assembly
8-8 Phaser 380 Color Printer
1. Exit cover:
a. Open the exit cover.
b. Carefully remove the E-clip securing each of exit cover's two
brass bushing at each end of the exit roller. Slide the bushings
inward to free the exit cover. Lift and remove the exit cover.

Figure 8-5 Removing the exit cover

Exit cover
Remove
C-clips
Slide bushings
inward
9661-05