Figure 7-7 Cleaning The Upper Feed Rollers - Tektronix Phaser 380 Service Manual

7
Cleaning and Maintenance
7-10 Phaser 380 Color Printer
4. Press Clean, the following message appears:
Cleam: Open Front Cover
5.
Open the front cover and the following message appears:
Turn Upper Feed Roller
Clean Cancel
6.
There are two sets of upper media-feed rollers located above the
maintenance tray. One set of rollers is rubber; the other set is white
plastic.
To clean the upper media feed rollers, press an alcohol-soaked
cleaning card (both sides) between the white and black lower rollers.
7.
Use the Clean button on the front panel to operate the upper feed
rollers. Press the Clean button a minimum of six times for each roller
to cycle the roller through one complete revolution. You may need
several cloths to clean the rubber rollers. If a cloth becomes dirty
during cleaning, discard it and use another.
Clean the
upper rollers

Figure 7-7 Cleaning the upper feed rollers

8. Press Exit and the printer displays the following message:
Clean:Upper Feed Rollers
<---- Clean
Cancel
9661-142
Cancel