Tektronix Phaser 380 Service Manual page 74

2
Installing the Printer and Drivers
2-36 Phaser 380 Color Printer
2. Enter the printer's IP address in the box labeled Name or address of
server providing lpd.
3. In the box marked Name of printer or print queue on that server,
enter PS (for PostScript) in uppercase, then click OK.
4. Click Close in the Printer Ports box.
5. In the Add Printer Wizard dialog box, click the box next to this new
port; then click Next.
6.
In the Add Printer Wizard dialog box, click Have Disk to add a new
Tektronix driver.
7. Type in the path name (CD-ROM or diskette) to the driver files, then
click OK.
8.
Select the printer model and click Next.
9. If prompted that a driver is already installed for this printer, select
Replace existing driver, then click Next.
10. Type in the printer's name (any name you want). Click the
appropriate box to use this printer as the default.
Click Next.
11. Check one of the following options, then click Next:
Shared To share the printer on the network (click on all
platforms that may use this printer). When sharing, the option
becomes available to install additional operating system printer
drivers such as Windows 95 or NT 3.51, so the appropriate driver will
automatically install on a workstation when it connects to this
NT queue. Using this option, individual drivers will not have to be
installed on each workstation.
Not shared If the printer is a local printer only
12. Select one of these options, then click Finish:
Print a Test Page Recommended
Yes
No Do not print a Test Page
13. Insert the original Windows NT distribution CD-ROM into the
computer's CD-ROM drive.
14. Type in the path name to the requested files, then click OK.
(The files are usually in the I386 directory for Intel-based Windows NT
servers.)
15. If you printed a Test Page, check if it printed; then click OK.