Tektronix Phaser 380 Service Manual page 163

Table 6-5 Front panel and fault history log error codes and messages (cont'd.)
Error code
24,014.13
24,015.14
24,016.15
24,017.16
24,018.17
24,019.18
24,020.10
24,021.11
24,022.12
24,023.13
24.024.14
24,025.15
24,026.16
24,027.17
24,028.18
24,029.10
Meaning
Engine is stuck while powering down.
unused
Engine is stuck while oiling the drum.
Engine is stuck while turning the pick rollers.
Engine is stuck while warming up -- thermals won't stabilize.
Engine is stuck while warming up -- thermals are stable.
Engine is stuck while warming up -- it's too cold to warm up.
Engine is stuck while cooling down.
Engine is stuck while in cool state.
Engine is stuck while in printhead adjust state.
Engine is stuck while flushing the printhead.
Engine is stuck while turning feed rollers.
Engine is stuck while in setup for head adjustment.
Engine is stuck while staging manual feed media.
Engine is stuck while performing idle mechanical operation.
Engine is stuck while in setup for turn pick rollers.
Troubleshooting
Service Manual 6-23
6