Figure 7-14 Placing The Cleaning Tray In The Media Tray - Tektronix Phaser 380 Service Manual

7
Cleaning and Maintenance
7-16 Phaser 380 Color Printer
d. Place the cleaning tray in the media tray so that the tray's sponge
pad is nearest the paper tray's handle. Press the two tabs
underneath the cleaning tray into the two square notches
provided in the media tray.

Figure 7-14 Placing the cleaning tray in the media tray

e. Insert the upper media tray with the cleaning tray into the printer.
4. Press the Clean button. The printer cleans the media-pick roller
while displaying the following message:
Cleaning
5. When the cleaning operation is complete, the following message
appears:
Remove Cleaning Tray
6.
Remove the upper media tray from the printer.
7. Remove the cleaning tray from the media tray.
Pull out the
media tray and
remove media
Install the
cleaning
tray
9661-150