Tektronix Phaser 380 Service Manual page 82

2
Installing the Printer and Drivers
2-44 Phaser 380 Color Printer
HTTP. As you set the printer's IP address, also set the gateway address
as described in the earlier topic "Setting the printer's IP address using
the front panel" on page 2-38.
FTP. An ftp session is opened with the ftp command, followed by the
printer's IP address. The put command is used to send the file
sample-file.ps to the printer. The bye command terminates the
connection.
ftp 134.67.66.11
put sample-file.ps
bye
Telnet. If the printer is to be used with standard TELNET clients, the
DataPortNumber parameter must be set to 23 decimal (23 is the
default).