RRP 5.4 Stack Full Sensor Actuator
(See
PL 6.1 Rear Cover Assembly With
Figure 83 Stack Full Sensor Actuator
Removal
Warning: Switch off the power and disconnect the Power Cord.
1.
Open the Rear Cover.
2.
Remove the Rear Cover (RRP 1.9 Rear Cover).
3.
Remove the Stack Full Sensor (RRP 5.2 Stack Full Sensor).
4.
Carefully pull the actuator out of the holder.
Replacement
Reinstall the components in the reverse order.
294
Fuser)
Phaser 5400 Laser Printer Service Guide