REP 28.2 Right Cover
Parts List on
PL 28.10 Item 4
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1.
Remove the Duplex Unit,
REP
10.1.
2.
Remove the IP Board Cover,
REP
3.
Remove 2 screws (metal) that secure the cover to the chassis.
4.
Slide the cover to the rear to release 6 hooks to remove the cover,
Figure 1 Remove the Right Cover
4 Repairs and Adjustments
REP 28.2, REP 28.3
WARNING
28.1.
Figure
1.
REP 28.3 Left Cover
Parts List on
PL 28.10 Item 1
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1.
Remove the Duplex Unit,
REP
2.
Remove the Waste Toner Cartridge.
3.
Remove 2 screws (metal) that secure the cover to the chassis.
4.
Slide the cover to the rear to release 6 hooks to remove the cover,
04/2016
4-150
WARNING
10.1.
Figure
Phaser 4600/4620/4622 Printer Service Manual
1.
Revised