Table of Contents
Advertisement
Off-line folding
Introduction
An important feature provided by the folder is off-line folding. You can use the
same settings for off-line folding and normal folding. Define the default
settings for off-line folding in the Océ Settings Editor. Do not fold Polyester or
transparent media. This media can cause media jams.
Use off-line folding only for the sheets that do not exceed a maximum
Note:
length of 6 m. If you try to fold a sheet longer than 6 m, an error occurs.
How to make off-line folds
Press the 'on-line' key on the printer operator panel and watch the light on the
1.
top cover of the folder.
[32] Indication light folder
If
the light is off
the light blinks slowly
the light blinks rapidly
the light is on
[32] Indication light folder
See the label on the top cover of the folder.
Note:
Make any setting for (off-line) folding on the printer operator panel.
2.
Feed the sheet of paper face down and with the legend on your right-hand side.
3.
Wait until the light on the folder no longer blinks before you feed a new
Note:
sheet. A media jam can occur.
Collect your output.
4.
242
User manual
Then
the printer is on-line and off-line folding is not
possible.
the printer is off-line but the folder is still
processing the last prints.
an error has occurred
the printer is off-line and you can feed a sheet.
Advertisement
Table of Contents
