Table of Contents
Advertisement
Define the media type and media size
Introduction
One of the features of the Océ TDS400 printer is the automatic media change
function. This function allows the printer to take another roll of the same media
format and media type in case you run out af media during a print job. You can
activate this function in the Océ Settings Editor.
The media change will only take place if both rolls contain the same
Note:
media format and media type.
The Océ TDS400 printer can not identify the media format and media
Note:
type. After you fill the media you must indicate the media type and media
format in this menu.
Purpose
To define the media type and media size of a media roll
When to do
After you insert a new media roll.
Before you begin
Use the
'next/select' key to select a menu or a value.
How to define the media size
Press the 'on-line' key to turn the printer off-line.
1.
Navigate to 'Media settings' and select this menu.
2.
Navigate to 'Roll 1' or 'Roll 2' and select this menu.
3.
Navigate to 'Width' select this menu.
4.
Navigate to the required media size and select this value.
5.
Press the 'on-line' key to turn the printer on-line.
6.
258
User manual
key, the
key and the 'previous' key to navigate. Use the
Advertisement
Table of Contents
