Table of Contents
Advertisement
How to make a copy and remove a strip
Place the original face down and right aligned.
1.
The scanner takes the original.
Define the job settings.
2.
Select 'Copy' with the upper-left softkey.
The copy job templates appear.
Open a copy job template with a left softkey.
The top 5 settings appears.
Scroll to 'Remove strip' and open this setting with the left softkey.
Select 'Leading' or 'Trailing' with the left softkey and define the value with
the scroll wheel or numeric keys.
The 'Leading' strip
Define the number of copies if necessary and press the green start key.
3.
To measure the size of a strip you can use the ruler available at the
Note:
scanner (metric).
Result
The Océ TDS400-CS removes a trailing or leading strip to the copy.
204
User manual
The 'Trailing' strip
Advertisement
Table of Contents
