Table of Contents
Advertisement
Remove any jammed material.
3.
Press the two knobs again and put the plate in its original position.
4.
Release the green lever in the lower section of the belt unit. (lift and pull
5.
forward the lower section to open the lower plate.)
[111] Opening the lower plate
[111] Opening the lower plate
Remove any jammed material.
6.
Pull the green lever again (until it locks into position) to close the plate.
7.
Close the belt unit door.
8.
Put the belt in the operation position (Push down carefully).
9.
296
User manual
Advertisement
Table of Contents
