Maintain the Océ TDS400 printer
Media
Load the media
Introduction
The Océ TDS400 printer is available with a roll unit for one or two rolls.
You can load each of the rolls on the Océ TDS400 printer with print media of
a different size or type.
The size and type of the available media are indicated on the operator panel.
If you install new print media, you must tell the system the size of the material
and the type of print material. (paper, transparent, or polyester)
When a roll is empty during a print job, a 'Roll empty' message is displayed
on the printer operator panel. The message appears also on the Océ System
Control Panel application. You must install a new roll of print material.
Install the paper on roll 1
Open the drawer completely.
1.
[63] Open the drawer
[63] Open the drawer
252
User manual