Calibrate The Scanner - Oce TDS400-CS User Manual

Calibrate the scanner

Introduction
You can calibrate the scanner when you are not satisfied with the scan quality.
Use the calibration wizard to calibrate the scanner.
How to calibrate the scanner
Select 'System' with the lower-right softkey.
1.
The 'System settings' screen opens.
Select 'Scanner calibration' with a left softkey to start the calibration wizard.
2.
The message 'Insert calibration sheet' and the following icon appears.
[58] The 'Insert calibration sheet' icon
[58] The 'Insert calibration sheet' icon
Insert the calibration sheet and press the green start key to start the calibration
3.
process.
The message 'Scanner is calibrating...' and the following icon appears.
[59] The 'Scanner is calibrating...' icon
[59] The 'Scanner is calibrating...' icon
When the calibration process is ready, the message 'Press OK to continue' and
the following icon appears.
[60] The remove the calibration sheet icon
[60] The remove the calibration sheet icon
Select 'OK' with the lower-right softkey.
4.
248 User manual