Print on a cut sheet
Introduction
Use the printer drivers or job submission software to create a copy job or a print
job on a cut sheet.
Before you begin
Use the
'next/select' key to select a menu or a value.
How to define the manual feed media type at the printer operator panel
Press the 'on-line' key to turn the printer off-line.
1.
Navigate to 'Media settings' and select this menu.
2.
Navigate to 'Manual feed' and select this menu.
3.
Navigate to 'Material' and select this menu.
4.
Navigate to the required media type and select this value.
5.
Press the 'on-line' key to turn the printer on-line.
6.
To change the manual feed time-out (see 'Define the manual feed
Note:
time-out at the printer operator panel' on page 129)
170
User manual
key, the
key and the 'previous' key to navigate. Use the