Table of Contents
Advertisement
Define the DHCP server
Introduction
Use the following procedure to define the DHCP server.
Before you begin
Use the
'next/select' key to select a menu or a value.
How to define the DHCP server
Make sure you have access to the system settings.
1.
(see 'Access the system settings in the system menu' on page 119)
Navigate to 'Network settings' and select this menu.
2.
Navigate to 'Adapter 2' and select this menu.
3.
Navigate to 'Yes' and select this value.
4.
Navigate to the next network setting or press the 'on-line' key to put the printer
5.
on-line again.
Result
The DHCP setting is defined.
120
User manual
key, the
key and the 'previous' key to navigate. Use the
Advertisement
Table of Contents
