Do a basic copy job
Introduction
The main steps of a basic copy job consists of the following steps.
Feed the original.
Press the green start key.
How to copy on the Océ TDS400-CS
Place the original face down and right aligned.
1.
The scanner takes the original.
[36] Place the original face down and right aligned
[36] Place the original face down and right aligned
Press the green start key.
2.
The scanner operator panel shows the copy job number and the status of the
copy job.
You can copy faster when you feed the original landscape.
Note:
Result
The Océ TDS400-CS makes a copy.
Copy jobs
181