Oce TDS400-CS User Manual page 13

Different products
The complete Océ solution is a combination of the following elements.
Scanner
Controller
Printer
Finishing options
Job submission software
Document management software.
Different jobs
The arrows in the illustration show the different possible jobs (see figure 1 on
page 12). The complete document workflow of the Océ solution includes the
following different jobs.
Print job.
A print job starts with a file (4) and ends with a print (3).
Copy job.
A copy job starts with an original (1) and ends with a copy (2).
Scan-to-file job.
A scan-to-file job starts with an original (1) and ends with a file (4).
Set-up and control the complete workflow.
Do which job where
Use the following products to do the following jobs.
Print jobs on the job submission software
Copy jobs on the scanner operator panel
Scan-to-file jobs on the scanner operator panel
Set up and control the complete workflow on the controller.
A setting in the job submission software or driver always overrules a
Note:
system setting.
Introduction 13